weld-on kit – Includes 2 upper and 2 lower gussets.
These weld on pieces reinforce the steering ball area where it’s most likely to bend from prolonged and repeat impacts of off-road driving.
Weld on high steer kit - DIY
“THE” original heavy duty weld on Y61 High steer kit.
Fully 3D designed in house using accurate 3D scanning and experienced cad design.
Our Mega High steer kit gets you...
Our panel tabs are sold in a pack of 10.
Available for M6 bolt or M6 rivnut
20mm from base of tab to centre of bolt hole.
Part No. Hole Dia. Thickness Height
LPT-0...
Kit contains 25 (1 spare) Quality wheel studs and 19mm hex nuts.
replaces the OEM 12mm studs that are very weak and not long enough for most after market wheels.
Installation of this upgrade requ...
Trail-Gear Rock Assault 6-Ply Limit Straps
Trail-Gear introduces the industry’s first 6-layer, 1.75” nylon webbing limit straps. Each strap features 4130 heat-treated Chromoly Steel buckles that ha...
RIGHT HAND THREAD - READY FOR IMMEDIATE DISPATCH
LEFT HAND THREAD - READY FOR IMMEDIATE DISPATCH
Our Extreme Rod Ends are perfect for suspension link application.
Chromoly steel bearing with hard w...
Nissan patrol front DIY weld on “front” diff guard kit manufactured in 8mm laser cut and folded steel for a great fit and super duty finish.
Adds a huge amount of protection to the very thin unp...
Kit includes 2 x folded 5mm laser and cut parts - designed to be welded back to back forming a 10mm thick bracket that then gets welded to your frame or chassis.
Commonly used for recovery and tie ...
Our custom made weld-on zip tie tabs are a strong and tidy way of securing your brake hoses or tubes/wires up to 8mm in diameter.
Radius design and custom pressed for a straight forward install a...
Suitable for Optima Red & Yellow Top Battery.
Mounting holes on the base and rear.
3mm Steel laser cut and CNC Folded.
Suitable for batteries with the following dimensions
L x W x H (in) 10.85 ...
Our T-Handle pull pins can be used for many different applications such as window frame latches and securing storage boxes and jacks.
Weld on threaded barrel and robust T-Handle in black.
Overa...
Suitable for mounting of engines & transmissions.
- Mounting width 54mm
- Tube OD 60mm
- bolt diameter 16mm
Kit contains:
- Quality bush suitable for M16 through Bolt.
- Heavy wall CNC machi...
Suitable for Odyssey PC 1500 & NorthStar NSB-AGM34M Battery.
Mounting holes on the base and rear.
3mm Steel laser cut and CNC Folded.
Suitable for batteries with the following dimensions
L x W ...
Our heavy duty Y61 axle trusses are designed using accurate 3D scanned models of OEM Nissan housings for the best fit and finish possible.
A great way to add a huge amount of rigidity to your hou...
Universal weld-on eyelets, availed in two sizes and suitable for many different applications. Commonly used for attaching spare tyre straps and medium duty recovery points.
- 10mm laser cut steel
S...
- 6mm laser cut steel
- Suitable for 2” tube (50.7mm)
- 16mm hole
- 65mm from tube centre to middle of bolt hole
Perfect for use with out universal engine/Trans mounting bushes.
Helps prevent gear oil from being directly pushed out your axle breather/vent tube.
laser cut 3mm steel and folded - welds to inside of axle housing.
Be sure to check all clearances inside your h...
3/4" x 3/4" Right Hand Male Rod End, Commonly used on steering links. 3/4 UNF Thread with 3/4 bore.
• 2-Piece Construction and Corrosion Resistant• Chrome-Moly Steel with Teflon/Kevlar injection m...
Weld on tie down/recovery points - 3 styles available.
- 25mm hole
- 10mm laser cut steel
- INDIVIDUAL
Options.
Long = 120mm base with offset hole
Short = 90mm base with offset hole
Centred = 90m...
Steel Weld on hinge usable for door frames/window net frames 80mm overall length with 8mm pin.
(Withgrease nipple)
Both 100mm and 80mm shown in picture.
Steel Weld on hinge usable for door frames/window net frames 100mm overall length with 10mm pin and grease nipple.
Both 100mm and 80mm shown in picture
3mm laser cut and folded - 75mm offset from centre of mounting tube and bolt hole.
M8 bolt hole, weld on bracket. Designed for laser lamp high performance lights, may also be suitable for mounting ...
