£14.99 GBP
Off
STEEL-IT Coatings - Steel Gray - 1 US Quart
UK SHIPPING ONLY - INTERNATIONAL CUSTOMERS PLEASE CONTACT US ABOUT SHIPPING
POLYURETHANE TOPCOAT
STEEL-IT FGPA1002Q STEEL GRAY
As with all STEEL-IT Brand Coatings, STEEL-IT Polyurethane Topcoat...
£1.00 GBP
Off
TRS Harness Web Cutter
This high quality harness-web cutter from TRS is a vital safety tool to have in any rally or race vehicle. This item has velcro on the back, meaning it can be easily mounted onto a dashboard.
£12.50 GBP
Off
Oval 6" LED RED Tail Light
12v Oval 6" LED RED Tail Light, with twin element and stop tail function.
£12.50 GBP
Off
Oval 6" LED AMBER Tail Light
12v Oval 6" LED AMBER Tail Light, with twin element and stop tail function.
£3.50 GBP
Off
2” x 4” travel Bump stop can
Suitable for fox and Terrafirma style hydraulic bump stops.
Weld on steel bump stop mounting can CNC cut with 2 x 10mm pinch bolts.
sold individually
£250.00 GBP
Off
PAIR - FOX Factory 2.5 Piggy Back Coil Over
Fox 2.5" Coil Over 16" Travel Piggy Back Reservoir.
SUPPLIED AS A PAIR (2 coil overs)
Supplied as pictured, no springs.
£2.00 GBP
Off
Ford 9/10 Inch Diff Gasket
O.R.A 9/10 inch heavy duty differential gasket - precision laser cut differential (sold individually)
Suitable for all Ford 9” & 10” style third members.
Can potentially be used more than on...
£15.00 GBP
Off
GM ECU Mount
GM ECU Mount utilising the 4 ECU cover screws to hold it to the bracket and then mountable to a flat surface
£15.00 GBP
Off
Inline Push Fit Connectors - Large Set
Box of assorted inline push fitting joiners.
60 in total.
12 mm x 12
10 mm x 12
8 mm x 12
6 mm x 12
4 mm x 12
Suitable for pneumatic and hydraulic systems
£100.00 GBP
Off
6” Double Ended Ram
6 Inch Rock Assault Double Ended Ram - RAM ONLY
Through years of research, development, and testing we at Trail-Gear have developed our double ended ram to meet the tough demands of top level rock ...
£4.00 GBP
Off
Rock Jock Left Hand Jam Nut 1 1/4 in.-12 LH thread
RockJock's Jam Nuts have been a staple in our many product lines for decades! From our many adjustable Johnny Joint products, Currectlync Steering components, to Antirock Sway Bar end links, our ja...
£5.00 GBP
Off
Suzuki Jimny Trail Safe Inner Axle Seals
Trail-Safe Suzuki Inner Axle Seals
Tired of dealing with oil leaks from your front inner axle seal? Trail-Gear has remedied that issue by offering our new Trail-Safe™ Samurai Inner Axle Seal. The ...
Nissan Y61 Knuckle Gusset Kit
weld-on kit – Includes 2 upper and 2 lower gussets.
These weld on pieces reinforce the steering ball area where it’s most likely to bend from prolonged and repeat impacts of off-road driving.
Tube Reservoir Mounting Bracket
2.5" shock reservoir mounting bracket.
Sold individually.
Y61 High Steer DIY Kit
Weld on high steer kit - DIY
“THE” original heavy duty weld on Y61 High steer kit.
Fully 3D designed in house using accurate 3D scanning and experienced cad design.
Our Mega High steer kit gets you...
Shock Mounting Brackets
Shock mounts for ultimate strength, and ease of installation.
Available in 1.25" or 1.50" mounting width
SOLD INDIVIDUALLY
1" x 1.25" Rod End & Jam Nut
RIGHT HAND THREAD - READY FOR IMMEDIATE DISPATCH
LEFT HAND THREAD - READY FOR IMMEDIATE DISPATCH
Our Extreme Rod Ends are perfect for suspension link application.
Chromoly steel bearing with hard w...
Panel Tabs M6 - Pack Of 10
Our panel tabs are sold in a pack of 10.
Available for M6 bolt or M6 rivnut
20mm from base of tab to centre of bolt hole.
Part No. Hole Dia. Thickness Height
LPT-0...
Sold Out
Y61 Heavy Duty Wheel Stud Kit - M14
Kit contains 25 (1 spare) Quality wheel studs and 19mm hex nuts.
replaces the OEM 12mm studs that are very weak and not long enough for most after market wheels.
Installation of this upgrade requ...
T-Handle Pull Pin - Weld on
Our T-Handle pull pins can be used for many different applications such as window frame latches and securing storage boxes and jacks.
Weld on threaded barrel and robust T-Handle in black.
Overa...
Y61 Super Duty Front Diff Guard - DIY
Nissan patrol front DIY weld on “front” diff guard kit manufactured in 8mm laser cut and folded steel for a great fit and super duty finish.
Adds a huge amount of protection to the very thin unp...
Weld on eye kit
Kit includes 2 x folded 5mm laser and cut parts - designed to be welded back to back forming a 10mm thick bracket that then gets welded to your frame or chassis.
Commonly used for recovery and tie ...
Laser Tab 001 - Long
PART NO. HOLE DIA. HOLE OFFSET THICKNESS
LT-001-L 12.5mm 50.03mm 6mm
Trail-Gear 6-Ply Suspension Limit Straps
Trail-Gear Rock Assault 6-Ply Limit Straps
Trail-Gear introduces the industry’s first 6-layer, 1.75” nylon webbing limit straps. Each strap features 4130 heat-treated Chromoly Steel buckles that ha...
Battery Tray - Optima
Suitable for Optima Red & Yellow Top Battery.
Mounting holes on the base and rear.
3mm Steel laser cut and CNC Folded.
Suitable for batteries with the following dimensions
L x W x H (in) 10.85 ...
Battery Tray - Odyssey PC1500
Suitable for Odyssey PC 1500 & NorthStar NSB-AGM34M Battery.
Mounting holes on the base and rear.
3mm Steel laser cut and CNC Folded.
Suitable for batteries with the following dimensions
L x W ...
£14.99 GBP
Off
STEEL-IT Coatings - Steel Gray - 1 US Quart
UK SHIPPING ONLY - INTERNATIONAL CUSTOMERS PLEASE CONTACT US ABOUT SHIPPING
POLYURETHANE TOPCOAT
STEEL-IT FGPA1002Q STEEL GRAY
As with all STEEL-IT Brand Coatings, STEEL-IT Polyurethane Topcoat...
Stepped Weld washer - 5/8” bolt hole for upto 6mm plate
CNC machined weld washed, suitable for reinforcing up to 6mm plate.
- 5/8” bolt hole (16mm)
- 30mm plate hole required
SOLD INDIVIDUALLY
HD Mounting Bush Kit - LARGE
Suitable for mounting of engines & transmissions.
- Mounting width 54mm
- Tube OD 60mm
- bolt diameter 16mm
Kit contains:
- Quality SuperPro bush suitable for M16 through Bolt.
- Heavy wall ...
Sold Out
Y61 Axle Truss Full Set
Our heavy duty Y61 axle trusses are designed using accurate 3D scanned models of OEM Nissan housings for the best fit and finish possible.
A great way to add a huge amount of rigidity to your hou...
Weld on Zip-Tie tab (AN3 hose or up to 8mm)
Our custom made weld-on zip tie tabs are a strong and tidy way of securing your brake hoses or tubes/wires up to 8mm in diameter.
Radius design and custom pressed for a straight forward install a...
Sold Out
HD Mounting Bush Kit - SMALL
Suitable for mounting removable components such as carrier bearings & spare wheel carriers
Mounting width - 40.2mm
Kit contains:
- Quality SuperPro bush with M12 Bolt sleeve
- Heavy wall CNC ma...
Sold Out
Laser Tab 002 - Flat
PART NO. HOLE DIA. HOLE OFFSET THICKNESS
LT-002-F 12.5mm 50 mm 6mm
Sold Out
Misalignment Spacer - 1” bore to 3/4” bolt (PAIR)
CNC machined misalignment spacer - machined in house.
-3/4 through bolt hole
- Fits 1” bore joint
- 2-5/8” mounting width (67mm)
- 17-4PH stainless steel
SOLD IN PAIRS
STEPPED WELD WASHER - 1/2” BOLT HOLE FOR UPTO 6MM PLATE
CNC machined weld washed, suitable for reinforcing up to 6mm plate.
- 1/2” bolt hole
- 20mm plate hole required
SOLD INDIVIDUALLY
Weld On Hinge 80mm - PAIR
Steel Weld on hinge usable for door frames/window net frames 80mm overall length with 8mm pin.
(Withgrease nipple)
Both 100mm and 80mm shown in picture.
Weld On Hinge 100mm - PAIR
Steel Weld on hinge usable for door frames/window net frames 100mm overall length with 10mm pin and grease nipple.
Both 100mm and 80mm shown in picture
Sold Out
Tube Mirror Bracket
Made in-house our steel mirror bracket clamps to the roll cage using simple jubilee clips.
Suitable for our 5" convex off-road mirrors.
Laser Tab 007 - Extra Long
PART NO. HOLE DIA. TAB LENGTH THICKNESS
LT-007-XL 8.5mm 144mm 4mm
Sold Out
Laser Tab 001 - Short
PART NO. HOLE DIA. HOLE OFFSET THICKNESS
LT-001-S 12.5mm 25mm 6mm
2 Bolt Tube Flange 1.50"
Suitable for joining or mounting 1.50" Tube.
Bolt hole - 10.5mm
Thickness - 8mm
Sold individually
Sold Out
Misalignment spacers - 3/4” bore to 5/8” bolt (pair)
Misalignment spacers - 3/4” bore to 5/8” bolt (pair)
CNC machined misalignment spacer - machined in house.
- 5/8 (16mm) through bolt hole
- Fits 3/4” bore joint
- 1.75” mounting width (44.5mm)
- ...
BREATHER OIL DEFLECTOR
Helps prevent gear oil from being directly pushed out your axle breather/vent tube.
laser cut 3mm steel and folded - welds to inside of axle housing.
Be sure to check all clearances inside your h...
3/4" x 3/4" Right Hand Male Rod End
3/4" x 3/4" Right Hand Male Rod End, Commonly used on steering links. 3/4 UNF Thread with 3/4 bore.
• 2-Piece Construction and Corrosion Resistant• Chrome-Moly Steel with Teflon/Kevlar injection m...
Y61 EXTENDED WHEEL STUD KIT - M12
Kit contains 1 full vehicle set of wheel studs and 19mm hex nuts + 1 spare.
Replaces the short OEM 12mm studs that not long enough for most after market wheels.
kit includes.
- 25 M12 x1.25mm whee...
Weld On Eyelet - Universal
Universal weld-on eyelets, availed in two sizes and suitable for many different applications. Commonly used for attaching spare tyre straps and medium duty recovery points.
- 10mm laser cut steel
S...
Lazer lamp mounting bracket
3mm laser cut and folded - 75mm offset from centre of mounting tube and bolt hole.
M8 bolt hole, weld on bracket. Designed for laser lamp high performance lights, may also be suitable for mounting ...
Sold Out
Laser tab 006 - 16mm hole
- 6mm laser cut steel
- Suitable for 2” tube (50.7mm)
- 16mm hole
- 65mm from tube centre to middle of bolt hole
Perfect for use with out universal engine/Trans mounting bushes.
Laser Tab 005
PART NO. HOLE DIA. HOLE OFFSET THICKNESS
LT-005 12.5mm 6mm
Laser Tab 004
PART NO. HOLE DIA. HOLE OFFSET THICKNESS
LT-004 12.5mm 40mm 6mm
Laser Tab 002 - Radius
PART NO. HOLE DIA. HOLE OFFSET THICKNESS
LT-002-R 12.5mm 35mm 6mm
Misalignment Spacer - 1” bore to 5/8” bolt (PAIR)
CNC machined misalignment spacer - machined in house.
-5/8 through bolt hole
- Fits 1” bore joint
- 2-5/8” mounting width (67mm)
- 17-4PH stainless steel
SOLD IN PAIRS
Y61 High Steer DIY Kit
Weld on high steer kit - DIY
“THE” original heavy duty weld on Y61 High steer kit.
Fully 3D designed in house using accurate 3D scanning and experienced cad design.
Our Mega High steer kit gets you...
63mm Billet Oil Cooler
Billet in-line steering coolers - 63mm OD x 11.5” Length - Suitable for AN8 o-ring fittings (7/8”-14)
Manufactured in house - used for steering fluid cooling.
https://armoury-parts.com/collections...
8” Double Ended Ram and Clevis Kit
Rock Assault™ Double Ended Ram and Clevis Kits
Through years of research, development, and testing we at Trail-Gear have developed our double ended ram to meet the tough demands of top level rock ...
Sold Out
Misalignment spacers - 3/4” bore to 5/8” bolt (pair)
Misalignment spacers - 3/4” bore to 5/8” bolt (pair)
CNC machined misalignment spacer - machined in house.
- 5/8 (16mm) through bolt hole
- Fits 3/4” bore joint
- 1.75” mounting width (44.5mm)
- ...
3/4" x 3/4" Right Hand Male Rod End
3/4" x 3/4" Right Hand Male Rod End, Commonly used on steering links. 3/4 UNF Thread with 3/4 bore.
• 2-Piece Construction and Corrosion Resistant• Chrome-Moly Steel with Teflon/Kevlar injection m...
Sold Out
Remote External Pressure Relief Valve
Remote External Pressure Relief Valve for SPX Series RACE USE Pumps
Quick Overview
The SPX2510 is designed to work with PSC SPX Series RACE USE Power Steering Pumps with a disabled internal flow c...
Sold Out
XR Series Extra Capacity 8.75" Tall Remote Reservoir (Off Road Applications)
INCLUDES:
8.75 Inch Tall Extra Capacity Remote Reservoir
Mounting Bracket Clamp
Vent Line Kit
FEATURES:
6061T6 aluminum construction available in Brushed Aluminum and Black Anodized finishes
Int...
10” Double Ended Ram and Clevis Kit
Rock Assault™ Double Ended Ram and Clevis Kits
Through years of research, development, and testing we at Trail-Gear have developed our double ended ram to meet the tough demands of top level rock...
3/4" x 3/4" Left Hand Male Rod End
3/4" x 3/4" Left Hand Male Rod End, Commonly used on steering links. 3/4 UNF Thread with 3/4 bore.
• 2-Piece Construction and Corrosion Resistant• Chrome-Moly Steel with Teflon/Kevlar injection mo...
Sold Out
Power Steering Serpentine Pulley 6 Rib 5.5"
Trail-Gear Power Steering Serpentine Pulleys - 6 Rib 5.5"
Our 5-Rib and 6-Rib Pulleys are designed to fit Power Flow power steering pumps and other power steering pumps with a .665”-.667” shaft. Th...
TG Double-Ended Ram Rebuild Kit
Double-Ended Hydro Ram Seal Kit
High quality replacement seal kit designed specifically for our 2.25" bore x 1.125" rod double-ended rams. The Double-Ended Hydro Ram Seal Kit includes all seals and...
6” Double Ended Ram and Clevis Kit
Rock Assault™ Double Ended Ram and Clevis Kits
Through years of research, development, and testing we at Trail-Gear have developed our double ended ram to meet the tough demands of top level rock ...
Aluminum Ram Clamp
Aluminum Ram Clamp
This mount are designed to mount your TG Rock Assault™ Double Ended Ram to almost any location on your rig. The clamp has a 2.5" ID. These Aluminum Weld-On Ram Mount is supplied...
£100.00 GBP
Off
6” Double Ended Ram
6 Inch Rock Assault Double Ended Ram - RAM ONLY
Through years of research, development, and testing we at Trail-Gear have developed our double ended ram to meet the tough demands of top level rock ...
6PK Smooth Billet Pulley
6082 billet aluminium idler wheel, 70mm OD with double bearing support and circling retainer and deep grooved sides for added security/belt support.
Finished in black anodise coating.
Includes
- 2 ...
TRAIL GEAR STEERING COLUMN
THIS PART IS ORDERED DIRECTLY FROM THE USA WILL TAKE APPROX 7-10 DAYS TO ARRIVE FROM DATE OF PURCHASE.
Steering Columns
130297-1-KIT - This steering column will allow you to use your existing Toyot...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device